A pair of assembled front oil-filled shock absorbers for the River Hobby Bullet 2WD. Supplied complete with springs, preload collars and alloy caps — no rebuilding or oil filling needed, they bolt straight on.

Oil-filled dampers control suspension movement through the damping fluid rather than friction alone, which keeps the tyres in contact with the ground over rough surfaces and stops the car pogoing on landings. Shocks are a wear and crash item: bent shafts, leaking seals and lost oil are normal outcomes of hard running, and a damaged shock changes how the car handles well before it fails outright.

Supplied as a matched pair, so both front corners get replaced together and the car stays balanced side to side.

Fitment

Confirmed fitment: River Hobby Bullet 2WD (RH-2011). River Hobby shares parts across several 1/10 platforms and with VRX and FTX equivalents, but fitment to other vehicles is not confirmed — check your model's parts list against RH-10014 before ordering, or measure against the 77-78mm eye-to-eye and 15mm body given above.

Specifications

Position: front
Type: oil-filled, assembled
Eye-to-eye length: approx 77-78mm fully extended
Body diameter: 15mm
Springs: fitted
Preload: threaded collar adjustable
Contents: 2 shock absorbers (1 pair)
Part number: RH-10014