The backbone of the buggy. The chassis plate is the one part every other part trusts — motor, transmission, suspension and steering all take their geometry from it, which is why a bent plate makes a buggy drive strangely long after the crash that bent it is forgotten. This is the genuine River Hobby stock aluminium chassis for the Bullet 2WD buggy (also spelled Bullett in Australian listings — same machine): the factory plate, restoring factory geometry, in the aluminium that gives the 2WD platform its low-slung stiffness.

Fitment and Fitting

Fits the River Hobby / VRX Bullet 2WD 1/10 buggy family — RH-2011 RTR and RH-2012 kit. A chassis swap is the deepest service a buggy gets — everything comes off, everything goes back on — so make it count: it's the natural moment to inspect bearings, check the transmission case for cracks, and replace stripped screws with fresh ones (aluminium threads deserve care — snug, not gorilla-tight). The tell that you need this part: set the old chassis on a flat surface and look for rock or daylight — a plate that isn't flat can't make the wheels sit square.

Specifications

Brand: River Hobby (VRX)
SKU: RH-10466 (VRX 10466)
Product: Stock chassis plate — aluminium
Fits: Bullet / Bullett 2WD 1/10 buggy — RH-2011, RH-2012
Type: Factory-standard replacement
Fitting Note: Full teardown — inspect bearings and hardware while apart