The MJX Hyper Go 10306 is an officially licensed 1/10 Ford Mustang Shelby GT500 on a proper hobby-grade 4WD brushless chassis – scale looks with the speed to back them up. The polycarbonate body carries the GT500's bonnet vents, splitter, rear wing, Cobra badges and Ford Performance plate, finished in Ford's blue with white stripes, and working LED head and tail lights. Underneath, a 3652 3200KV sensored brushless motor and 80A ESC give smooth throttle from a crawl and around 47km/h on the included 2S pack, or 70km/h if you fit a 3S LiPo.

The chassis is a CNC-machined 7075 aluminium plate with oil-filled shocks, metal drive shafts and a 253mm wheelbase, so it takes the power without flexing and is straightforward to work on. A G3C gyro is built into the receiver to keep the car straight under hard acceleration and catch slides, adjustable from the transmitter, which makes the 3S speeds usable rather than terrifying. MJX includes a second set of white wheels with knobby rally tyres alongside the fitted on-road set, so the same car runs on bitumen, hard-packed dirt and gravel.

This version comes ready to run with a 2S 5000mAh 35C LiPo and a USB charger, so apart from four AA cells for the transmitter there is nothing else to buy. Spare rod ends and screws and a tool set are in the box.

Features

• Officially licensed Ford Mustang Shelby GT500 body with LED lights, Blue
• 3652 3200KV sensored brushless motor and 80A ESC, 2S–3S
• Up to 47km/h on the included 2S, up to 70km/h on 3S (not included)
• CNC 7075 aluminium chassis, 4WD shaft drive, oil-filled shocks
• Built-in G3C gyro, adjustable from the transmitter
• Two tyre sets included – on-road fitted, rally tread spare
• 2.4GHz pistol-grip transmitter, 120m+ range
• Ready to run with 2S 5000mAh LiPo and charger

What's in the Box

• 1x MJX Hyper Go 10306 Ford Mustang Shelby GT500, assembled, electronics installed
• 1x 2.4GHz transmitter
• 1x 7.4V 2S 5000mAh 35C LiPo battery, XT60
• 1x USB charger (2S–4S) with USB-C cable
• 1x Set of white rally wheels and tyres (4)
• 1x Spare rod ends and screw set
• 1x Tool set – hex keys, cross wrench, screwdriver
• 1x Instruction manual

Needed to Complete

• 4x AA batteries for the transmitter
• USB power supply (phone charger or power bank, 5V 2–3A) for the charger
• Optional: 3S LiPo with XT60 for maximum speed

See the Hyper Go 10306 in Action

Specifications

• Brand: MJX
• Model: Hyper Go 10306
• Scale: 1/10
• Body: Licensed Ford Mustang Shelby GT500, polycarbonate, Blue
• Drive: 4WD shaft drive
• Motor: 3652 3200KV sensored brushless
• ESC: Angry Snail 80A sensored brushless, 2S–3S
• Gyro: G3C, built in
• Top speed: Approx. 47km/h (2S), 70km/h (3S)
• Chassis: CNC 7075 aluminium
• Wheelbase: 253mm
• Track width: 165mm
• Length / width / height: Approx. 440 x 190 x 130mm
• Weight: Approx. 2.1kg
• Lights: LED head and tail lights
• Radio: 2.4GHz, 4x AA (not included)
• Battery: 2S 5000mAh 35C LiPo, XT60 (included)
• Run time: Up to 16 minutes
• Completion level: RTR