Roof-mounted police light bar for 1/10 scale builds, with blue and red LEDs behind an oval lens housing and seven switchable flash patterns. Plugged into channel 3, the modes cycle from your transmitter — no reaching under the body to fiddle with a switch, and you can run everything from a slow patrol flicker to a full pursuit strobe on demand.

The 6–8.4V input range means it runs happily from a spare receiver channel or BEC across standard 2S-class electronics, including 7.4V and 8.4V high-voltage setups, with no separate battery or dropping resistor needed. At 98mm long it's proportioned for 1/10 bodies — police liveried touring cars and drifters are the obvious builds, and it sits equally well on a crawler or trail truck playing outback patrol.

Wiring is plug-in simple: connect to channel 3, mount the bar to the roof, and assign the mode switching to a spare switch or dial on your transmitter. If your receiver's third channel is occupied, a Y-lead or a spare channel on a 4+ channel receiver does the job.

Package contents: 1 x oval police LED light bar

Specifications

Brand: Hobby Details
Part number: DTLR05014
Style: Oval lens
LED colours: Blue/Red
Length: 98mm (3.85")
Input: 6–8.4V, receiver channel 3
Flash modes: 7
Scale: 1/10