Take your 3D flying to the next level with the E-flite Eratix 3D SWS 1.6m (64") – the big brother of the hugely popular Eratix 3D FF 860mm flat foamy. Part of E-flite's Sport Wood Series, the Eratix pairs the lively, precise handling that made the original a favourite with the light weight and rigidity only built-up wood construction can deliver – crisper snaps, steadier harriers and locked-in hovers with none of the airframe flex.

This BNF Basic is a first for a built-up model in this class: it bolts together in a fraction of the time of comparable kits, with the complete Spektrum power and control system factory installed. The Avian 5055 500Kv brushless motor and Avian 100A Smart ESC run on 6S LiPo power, four Spektrum high-voltage metal-gear servos drive the control surfaces, and the AR637TA+ receiver brings AS3X+ stabilisation for a locked-in feel in wind plus optional SAFE Select envelope protection while you learn new manoeuvres. Bind it to your Spektrum transmitter, add a 6S pack, and you are flying.

In the Box

• 1x E-flite Eratix 3D SWS 1.6m (64") BNF Basic airframe, factory assembled and covered in UltraCote
• 1x Spektrum AR637TA+ 6-channel receiver with AS3X+ and SAFE Select (installed)
• 2x Spektrum A180 HV digital metal-gear mini servos (installed, rudder and elevator)
• 2x Spektrum A179 HV digital metal-gear mini servos (installed, ailerons)
• 1x Spektrum Avian 5055-500Kv brushless outrunner motor (installed)
• 1x Spektrum Avian 100A brushless Smart ESC (installed)
• 1x Set of optional-use Side Force Generators
• 1x Set of optional-use wheel pants
• 1x Wing bag
• 1x Product manual

Needed to Complete

• Full-range 6+ channel Spektrum DSMX/DSM2 compatible transmitter
• 6S 22.2V 3200–7000mAh LiPo with EC5 or IC5 connector
• Compatible LiPo charger

Download the E-flite Eratix 3D SWS 1.6m (64") manual here

E-flite Eratix 3D SWS 1.6m (64") BNF Basic – Features

Skill Level 2 – Some Experience Required

Skill Level 2 aircraft like this one suit RC pilots who already have some experience and the skills to assemble, set up and fly similar class models. You should be able to fly models like the E-flite Eratix 3D FF (Flat Foamy) 860mm, Sportix 1.1m, Timber X 1.2m, Extra 330 SC 3D 1.3m or similar before attempting the Eratix 3D SWS 1.6m.

See the Eratix 3D SWS in Flight

Easy Assembly

The BNF Basic Eratix 3D SWS 1.6m arrives mostly factory assembled with the power system, servos and receiver installed, including four high-voltage, metal-gear digital Spektrum A179 and A180 mini servos. The two-piece horizontal stabiliser bolts into place and the elevators and rudder install with captured pin hinges, so no glue is needed and you will be flying in less time than any other model in its class.

Wood Airframe

The built-up balsa and lite-ply airframe with carbon fibre reinforcement throughout is lightweight yet stiff and strong, for a flying experience foam models can't match. It arrives mostly factory assembled and finished in genuine UltraCote film covering, and if you damage an airframe part you can't repair, spare parts are available to order.

Smart Transmitter File

The receiver in this BNF is loaded with a Smart Transmitter File (STF) that makes programming your transmitter as easy as a few clicks. When you bind an NX or iX series transmitter to an STF-equipped aircraft, all programming parameters download automatically from the receiver – switch assignments, rates, expo, telemetry and voice callouts configure themselves. No lengthy step-by-step setup; just push-button convenience that gets you flying faster.

Wide Flight Envelope

Like other models in its class, the Eratix 3D SWS is capable of slow cruising, smooth sport flying, basic aerobatics and aggressive 3D – all in the same flight. It is a true "mild to wild" aeroplane that intermediate to experienced pilots will appreciate.

Flexible Power

The factory-installed Spektrum Avian brushless outrunner runs 6S 3200–7000mAh batteries, giving a wide range of flight times and performance – from sport flying and basic aerobatics to hovering and unlimited vertical. The large top-mounted canopy hatch makes installing and removing batteries easy.

Bind-N-Fly Completion Level Advantage

Already own a Spektrum transmitter? Bind-N-Fly (BNF) aircraft get you into the air quickly with the best control experience possible. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed, so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly.

Smart Technology

The Eratix 3D SWS is equipped with a Spektrum Avian Smart ESC that provides real-time power system telemetry – including overall battery voltage and more, with both Smart and non-Smart batteries – via compatible receivers (including the AR637TA+ installed in this BNF Basic) and Spektrum AirWare transmitters (DX6e and DX8e, DX6 G2/G3 and DX8 G2, DX9, NX6 to NX20, iX12 to iX20 and others) while you fly. Optional-use motor/thrust reversing can shorten rollout after landing and offers other special ground handling capabilities (6+ channel transmitter required for reversing).

Exclusive Technologies

The BNF Basic Eratix 3D SWS is equipped with Spektrum AS3X+ and SAFE Select. Enhanced AS3X+ works behind the scenes to smooth out wind and turbulence and deliver an even more locked-in feel than standard AS3X, so it flies like a larger aeroplane, and it has been tuned for 3D/XA (eXtreme Aerobatic) performance without compromising feel. Optional-use SAFE Select adds pitch and bank angle limits and automatic self-levelling that can be switched on and off in flight. If you don't want SAFE Select, simply bind the receiver normally and only AS3X+ will be active. The receiver is also loaded with a Smart Transmitter File that imports all settings into NX and iX series transmitters during binding.

E-flite Eratix 3D SWS 1.6m (64") BNF Basic – Specifications