River Hobby 10250 M3x20mm Flat Head Hex Screws, 6pcs (FTX6540)
Now $4.95
PART FINDER (Under Construction)
SKU code: RH-10690
Make 4 interest-free payments of $1.25 fortnightly and receive your order now.
Genuine River Hobby rear diff shaft for the VRX Octane and the whole FTX Ultra-4 family – Outlaw, Kanyon XL and Zorro – which all share the same rear axle. This is the hardened steel shaft that runs through the rear differential and carries the drive out to the rear axle driveshafts; it takes the full torque hit every time the rear wheels land under power or a crawler digs in on a climb, and it's one of the first drivetrain parts to twist or wear at the pins. River Hobby part 10690 is the same shaft fitted at the factory, and it's the direct equivalent of FTX8338, so it drops straight into the existing diff with the original bevel gears and pins.
Replacing it is a diff-out job: drop the rear axle housing, split the diff case, swap the shaft across and reassemble with fresh diff grease. If the shaft has let go the bevel gears have usually copped it too, so check the small bevels and the diff pin while you're in there. This is the rear shaft only – the centre and front shafts are separate parts.
This part could fit more models, please check your manual.
Genuine River Hobby spare part, stocked in Australia.
| SKU | RH-10690 |
| Brand | River Hobby |
| Shipping Weight | 0.0200kg |
| Shipping Width | 0.110m |
| Shipping Height | 0.020m |
| Shipping Length | 0.140m |
| Shipping Cubic | 0.000308000m3 |
Help other RCMA Model & Hobby Shop users shop smarter by writing reviews for products you have purchased.
River Hobby 10250 M3x20mm Flat Head Hex Screws, 6pcs (FTX6540)
Now $4.95
River Hobby 10244 M3x14mm Cap Head Hex Screws, 6pcs (FTX6532)
Now $6.29
River Hobby 85144 Ring Self Tapping Screws 3x4mm, 4pcs (FTX6530)
Now $8.99