The MJX Hyper Go 14207 is a 1/14 4WD brushless truggy – the Hyper Go range's all-rounder, with monster-truck tyres on a low truggy stance and a brushless power system that will see around 50km/h on the included 2S pack and 60km/h plus on a 3S. It is the current V3 version of the model, and MJX ship it with two body shells: the black and red camo one fitted, and a yellow and white Hyper Go livery in the box, both polycarbonate and both with the roof scoop and rear wing.

Under the shell it is hobby-grade through and through: an Angry Snail BL2852 4200KV four-pole brushless motor and E50R ESC, 4WD shaft drive on metal gears, oil-filled shocks on independent suspension with multiple shock mounting positions and adjustable camber and toe, a wheelie bar out the back for 3S launches, and an LED light bar in the front bumper. The electronics are splash-resistant for puddles and dust. At 1560g with a 195mm wheelbase it is small enough to run in a backyard or park and tough enough for jumps and gravel.

Ready to run with a 2S 3000mAh LiPo and USB charger; add four AA cells for the transmitter and it drives. Every part is serviceable and MJX spares are widely available, which is what makes the Hyper Go a sensible first brushless car rather than a disposable one.

Features

• 1/14 4WD brushless truggy, V3 version
• Angry Snail BL2852 4200KV four-pole brushless motor with E50R brushless ESC, 2S–3S
• Around 50km/h on the included 2S, 60km/h plus on 3S (not included)
• Two polycarbonate body shells – black/red camo fitted, yellow/white Hyper Go spare
• Metal gear 4WD drivetrain, oil-filled shocks, wheelie bar
• Adjustable camber, toe and shock positions
• LED front light bar
• Splash-resistant electronics
• 2.4GHz pistol-grip transmitter
• Ready to run with 2S 3000mAh LiPo and USB charger

What's in the Box

• 1x MJX Hyper Go 14207 truggy, assembled, electronics installed, black/red camo body fitted
• 1x Spare body shell, yellow/white Hyper Go livery
• 1x 2.4GHz transmitter
• 1x 7.4V 2S 3000mAh 25C LiPo battery, T-plug (Deans)
• 1x USB charger
• 1x Tool set – wheel wrench, hex keys, screwdriver
• 1x Spare parts pack
• 1x Instruction manual

Needed to Complete

• 4x AA batteries for the transmitter
• USB power supply (5V 2A phone charger or power bank) for the charger
• Optional: 3S LiPo with T-plug for maximum speed

Specifications

• Brand: MJX
• Model: Hyper Go 14207 (V3)
• Scale: 1/14
• Type: Off-road truggy
• Drive: 4WD shaft drive, metal gears
• Motor: Angry Snail BL2852 4200KV four-pole brushless
• ESC: MJX E50R brushless, 2S–3S, splash-resistant
• Top speed: Approx. 50km/h (2S), 60km/h+ (3S)
• Suspension: Independent, oil-filled shocks, adjustable camber and toe
• Wheelbase: 195mm
• Weight: Approx. 1560g
• Lights: LED front light bar
• Body: 2x polycarbonate shells included
• Radio: 2.4GHz, 4x AA (not included)
• Battery: 2S 3000mAh 25C LiPo, T-plug (included)
• Completion level: RTR