Complete replacement steering assembly for the MJX Hyper Go 1/14 platform, suiting the 14209 buggy and 14210 truggy. This is the current C revision fitted to 2024-onward vehicles — the key upgrade over the earlier 14430/14430B sets is the switch to red anodised aluminium bellcranks and ball bearings in place of the original plastic cranks and bushes, taking slop out of the steering and holding toe settings under hard driving.

The set includes everything between servo and knuckles: the aluminium bellcrank and post, two adjustable turnbuckle steering links with rod ends fitted, the drag link, the metal steering brace plate, ball bearings and washers for the bellcrank pivots, plus ball studs and mounting screws. Turnbuckle links mean front toe is properly adjustable rather than fixed — worth setting up once installed.

A sensible spare to keep on hand, since the steering assembly takes the hit in front-end impacts — and a worthwhile upgrade fitted to earlier bushing-equipped Hyper Go models.

Package contents (1 set)

• Aluminium bellcrank arm and post (red anodised)
• 2 adjustable turnbuckle steering links with rod ends
• Drag link
• Metal steering brace plate
• Ball bearings and washers
• Ball studs and mounting hardware