A 9g sub-micro digital servo with a 60mm lead, used as original equipment across a range of E-flite park flyers and EDF jets. Digital operation gives better centring and holding power than an analogue servo of the same size, which matters on small control surfaces where a few degrees of slop shows up as a wandering trim.

The 60mm lead is the defining feature of this part number. It's a short lead intended for installations where the servo sits close to the receiver, and it saves the bundled excess cable that a standard-length lead leaves in a small fuselage. If your model needs a longer run, check the part number on your original servo before ordering.

Supplied with a servo horn and a self-tapping screw.

Fitment

Listed by E-flite as compatible with:

• Habu SS 50mm EDF Jet BNF Basic with AS3X+ and SAFE Select (EFL-3134)
• Habu SS 50mm EDF Jet BNF Basic with SAFE Select and AS3X (EFL02350)
• Habu SS 50mm EDF Jet PNP (EFL-3133)
• Habu SS 50mm EDF PNP (EFL02375)
• S.E.5a 900mm BNF Basic with AS3X+ and SAFE Select (EFL10950)
• S.E.5a 900mm PNP (EFL10975)
• Slow Ultra Stick 1.2m BNF Basic with AS3X and SAFE Select (EFL0350)

Check the lead length

E-flite also produces the A345 with a longer lead under a different part number. The servos are otherwise identical, so confirm you need the 60mm version before ordering.

Specifications

Type: digital, sub-micro
Weight: 9g
Lead length: 60mm
Contents: 1 servo, 1 servo horn, 1 self-tapping screw