Overview

The Phoenix Tiger 60 is ideal for beginners and intermediate-level pilots. Its semi-symmetrical wings allow for slow flight. The Tiger 60 is wood and balsa construction. Factory pre-covered with an attractive colour scheme. Pre-glued and pinned hinges are on all control surfaces. All the hardware is included (servo wire, fuel tank, wheel/landing gear, etc). You simply require an engine (or an electric motor) and a radio system.

Technical Data

- Wingspan: 1800mm (70.8in)
- Length: 1605mm (63.2 in)
- Flying weight: 3700-4200 gr
- Wing area: 55.8 dm2
- Wing loading: 75g/dm2
- Wing type: Naca airfoils
- Covering type: V-kote film
- Spinner size: Plastic 70mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 6 standard servo: 2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .61-.91 / 2-stroke (not included)
- Motor: brushless out runner (not included)
- Gravity CG: 85-90 mm (3.3-3.5 in) Back from  the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
- Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Low wing sport

Video

TIGER 3 .61-.91 SCALE 1:5 ARF PH066 PHOENIXMODEL - YouTube

Video will open in a new window

[isdntekvideo]

Recommeded Electric Setup

- Motor: size .60 (not included)
- Lipo cell: 6 cells / 4000 – 5500mAh (not included)
- Esc: 60-100A (not included)

Features
- Designed for compatibility with both GP and EP flight
- Bolt-on two-piece wing for easy transport and setup at the field
- Removable canopy for easy change lipo battery and set up radio
- Prepainted pilot figure, preinstalled in cockpit
- Extremely lightweight laser-cut all-wood construction
- All hardware included