JP Hobby Electrical Magnetic Brake Controller V2

Electrical Magnetic Brake Controller - For RJP Hobby magnetic brake systems. This is the same controller that is included with JP Hobby Electric Wheel and Brake Sets.

JP E-Brake Using illustration

• Voltage input : 2S-6S Can tap directly on aircraft batteries Or use an external battery 2S-6S
• Voltage output: 6-10V
• Signal input : Connect the module on your receiver on a 2 or 3 position switch channel or for variable braking force, to a slider or rotary (variable) knob on your TX. Some will set up brakes as a mix, with the "down elevator" to save a channel.
• The braking force is controlled by the servo travel/endpoints you set in your TX.

Specifications

•  Input：7.4v~26v (2~6S lipo)
•  Output Voltage: 6~10V
•  Size: 35 x 24 x 6mm
•  Weight: 15g