3S 11.1V 1300–2200mAh or 4S 14.8V 1000–2200mAh LiPo with EC3™ or IC3™ Connector
Compatible LiPo charger
LiPo protective case
THE ULTIMATE CONSCENDO®
When the Conscendo® was first introduced it was geared towards RC newcomers who wanted to teach themselves how to fly with a powered glider. A few years later an "Advanced" version that offered more power for soaring, sport flying and aerobatics became a favorite of many intermediate and experienced pilots alike. Now the E-flite® Conscendo Evolution 1.5m evolves the design to be the most powerful, capable and fun to fly Conscendo yet! A stronger and stiffer airframe molded from higher density EPO combines with the more powerful 3S and 4S compatible power system featuring a telemetry-capable ESC to deliver higher speeds and more aerobatic performance — while offering the same smooth sport flying and soaring capabilities the Conscendo has always been known for.
Evolved to be the most powerful, capable and fun to fly Conscendo® yet for soaring, sport flying, high speeds and high energy aerobatics
Higher density EPO results in a stronger and stiffer airframe capable of more aerobatic performance and higher speeds
More powerful 3S and 4S compatible brushless power system with outrunner motor and folding propeller
30A telemetry-capable ESC provides real-time battery voltage, current, motor RPM and other data (via compatible receivers and transmitters)
Long flight times up to 15-20+ minutes with a mix of power on/off flying using 3S 1300–2200mah or 4S 1000–2200mAh batteries
4-channel control including ailerons with four (4) factory-installed servos and linkages
Spektrum™ AR637TA receiver with full-range telemetry and industry-leading DSMX® technology (BNF® Basic version only)
Easy to fly with innovative and optional-use SAFE® Select flight envelope protection (BNF Basic version only)
The unmatched stability and locked-in feel of exclusive AS3X® technology (BNF Basic version only)
Easy to launch, fly and land, making it a perfect choice for a first powered sailplane model
Lightweight yet durable composite-reinforced, high-density EPO construction
Easy to install/remove two-piece wing and stabs
Fast and easy assembly – no glue required
Construction with higher density EPO results in a stronger and stiffer airframe with a smoother finish. Combined with carbon and other composite reinforcement in the fuselage, wings and tails, the Conscendo® Evolution can handle higher speeds and higher energy aerobatics – yet is still lightweight to deliver excellent soaring and sport flying performance, plus long flight times up to 15-20+ minutes with a mix of power on and power off flying.
The factory-installed brushless power system features a 30-amp telemetry-capable ESC plus a specially-tuned motor and folding prop that deliver an abundance of thrust with a 3S LiPo battery, or more speed and unlimited vertical performance with a 4S battery without the need for any modifications or upgrades.
Approximate Assembly Time
Less than 1 hour
Approximate Flight Time
Approximately 5 minutes
LiPo (3.7V per cell)
CG (Center of Gravity)
2-1/4 - 2-3/4 in (57-71 mm) behind leading edge of wing
Front and rear skids
Minimum Required Radio
Minimum Speed Control
39.6" (1006 mm)
9.5" (241 mm)
Recommended Motor Battery
4S 1800mAh LiPo w/EC3 or IC3 connector (sold separately)
Trim Scheme Colors
Yellow and blue
405.3 sq. in (26.2 sq. dm)
59" (1499 mm)
Be The First To Review This Product!
Help other RCMA users shop smarter by writing reviews for products you have purchased.