ORATEX 2M FOKKER RED (020)
Iron-on type polyester fabric covering ideal for all scale models, large scale models and historical models.
- Easy application: due to its pliability and a shrinkage of 5% in both directions ORATEX is easy to apply round corners and edges. Creases can easily be removed with a heat-gun.
- Excellent adhesion: the adhesive of ORATEX is about twice as strong as that of conventional fabric coverings.
- Remarkable toughness and stability of the fabric.
- Protective seal: the surface of ORATEX has been treated to make it resistant to fuel and oil.
Iron on self adhesive fabric. A very strong covering material. Weight: 85~98 g.s.m. Very easy to apply. Much stronger than films, but heavier. Has a matt surface which is already fuelproofed with a resin coating. Easily cleaned with soapy water to remove dirt or oil. Apply Fuelproofer to make glossy or protect from soiling. Best for large models, old timers and vintage models, or medium to large models with open frame construction and scale models of fabric covered aircraft. The strongest and toughest covering. Iron on application. Can be painted with Fuelproofer (to add gloss) and with Enamels.
Note: Trim does not stick properly to Tex. Do NOT use varnish or polyurethane type fuelproofers, dope or car cellulose on Tex.
Be The First To Review This Product!
Help other RC Model Aircraft users shop smarter by writing reviews for products you have purchased.
Write a product review