FUTABA 14SG With R7008SB Receiver Mode 1

$825.00
Sold Out


Make 4 payments of $206.25 over 8 weeks and get it now!


Calculate Shipping

T14SGThis 14SG has it all. . . plus much more!

Futaba proudly presents the new 14SG, the ultimate 14-channel system using groundbreaking 2.4GHz FASSTest technology. It is also compatible with Futaba FASST and S-FHSS protocols, which allows you to fly with almost every 2.4GHz air receiver Futaba produces.

The 14SG be able to transmit plus receive telemetry data. Install Futaba telemetry sensors (sold separately) to handle flight data, receive alerts when in flight and much more. Helicopter pilots will like the 14SG's 3-axis gyro support — that will make the new 14SG an ideal system designed for flybarless flight!

The improvements do not stop there. Turn the 14SG over, and you will see the engineering is as rock-solid as any other Futaba system. It is also very comfortable to use, as a result of rubber grips that really help reduce flyer fatigue — an additional benefit ensure that pilots will appreciate.

The 14SG has a great deal to offer, we can't talk about every thing here. To check out just what the new 14SG is able to do, read on below. . .

Frequency

Earphone jack
14SG Grips
Switchs
Programming port & earphone jack
Rubber hand grips and adjustable gimbals
Wide switch spacing
Edit Switchs
Battery SD CARD
Balanced neck Strap
Edit switches
Battery compartment/SD card slot
Balances perfectly
Home Screen
Telemetry Screen
Servo Speed
Home screen
Main telemetry screen
Servo speed screen
Modulation Screen
User Menu
Quick Select Menu
Modulation screen
User-configurable menu
Customizable quick select menu
Warning Menu
Gyro Settings
Govenor Mode
Sensor warning setup menu
3-axis gyro menu
Governor menu
 
About the 14SG:
  • Channels: 12 proportional, 2 switched
  • Compatible with FASSTest, FASST and S-FHSS protocols
  • FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
  • Free user-updatable software
  • 30-model memory
  • 10-character user naming
  • 10-character model naming
  • Airplane, helicopter and glider programming
  • Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
  • SensorTouch™ programming
  • Compatible with secure digital memory cards for external storage of model setups and software updates (32MB-2GB or HC (High-Capacity) 4GB-32GB)
  • Left and right assignable slider switches
  • Two assignable rotary knobs
  • Six assignable three-position switches
  • One assignable momentary two-position switch
  • One assignable two-position switch
  • Comfortable rubber grips on the sides and back
  • Wide top switch spacing
  • Adjustable stick tension
  • Dual ball bearing gimbals
  • 4 vibration warning types
  • Home/Exit; User Menu/Servo Monitor buttons
  • Audio earphone jack (for telemetry alarms)
  • 6V 1800mAh NiMH battery pack
  • User stick calibration
  • Trainer system
  • Servo speed adjust
  • 5 programmable mixes
  • V-tail, Ailvator, winglet, motor mixing
  • Trim mix
  • Logic switch (condition switch only)
  • Internal programmer for S.Bus servos
Airplane Features
  • 7 different wing types
  • 3 different tail types
  • 2 different rudder types
  • Flap setting menu
  • Differential ailerons
  • Aileron to camber flap mixing
  • Aileron to brake flap mixing
  • Aileron to rudder mixing
  • Rudder to aileron mixing
  • Rudder to elevator mixing
  • Camber mixing
  • Elevator to camber mixing
  • Camber flap to elevator mixing
  • Snap roll mixing
  • Airbrake mixing
  • V-Tail mixing
  • Ailvator
  • Winglet
  • Motor mixing
  • Fuel mixture mixing
  • Gyro mixing
  • Throttle curve (5-point)
  • Pitch curve (5-point)
  • Idle down
Helicopter Features
  • 6 swash plate types
  • Pitch/throttle curves (5-point)
  • Throttle hold
  • Swash mix
  • Throttle mix
  • Pitch to rudder mixing
  • Fuel mixture
  • Gyro (Flybarless support)
  • Governor (700-3500 rpm)
  • Hover pitch
  • Hover throttle
  • High/low pitch
  • Swash AFR
  • Swash setting (mixing rate, linkage compensation, speed compensation)
  • Swash ring (electronic)
  • Throttle cut

Glider Features
  • 11 different wing types
  • 3 different tail types
  • 2 different rudder types
  • Flap setting menu
  • Differential ailerons
  • Aileron to camber flap mixing
  • Aileron to brake flap mixing
  • Aileron to rudder mixing
  • Rudder to aileron mixing
  • Rudder to elevator mixing
  • Camber mixing
  • Elevator to camber mixing
  • Camber flap to elevator mixing
  • Butterfly mixing
  • Butterfly to elevator mixing
Futaba R7008SB S.Bus2 2.4GHz FASSTest Rx 14SG 18MZ

This is the Futaba R7008SB 2.4GHz FASSTest 8+ Channel High-Voltage ReceiverR7008SB Receiver
for the 18MZ Radio System.

FEATURES: Bi-directional communication with a FASSTest Futaba transmitter
using the S.Bus2 port
Multiple optional telemetry sensors may be connected to the S.Bus2
port and the data displayed on the transmitter
Includes both standard PWM output ports and S.Bus output ports
External voltage port, 0-70V DC
The External Voltage connector needed for this is:
FUTM5551 CA-RVIN-700 EX VLT CBL
One year limited warranty through Hobby Services beginning at date
of purchase.

INCLUDES: Futaba R7008SB 2.4GHz FASSTest Receiver with Instructions

SPECS: Receiving Frequency: 2.4GHz FASSTest system
Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
Current drain: 75mA
External voltage Port: 0 - 70V DC
Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
Weight: 0.38oz (10.9g)

(FUT14SGR7008SBM1)

SKU FUT14SGR7008SBM1
Brand Futaba
Shipping Weight 0.8000kg
Shipping Width 0.250m
Shipping Height 0.250m
Shipping Length 0.120m
Shipping Cubic 0.007500000m3

Be The First To Review This Product!

Help other RCMA Model & Hobby Shop users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category